• Search Catalog

Cart Summary

Shopping Cart Empty

Main > Motors and drivers

Motors and drivers

Small Image
Add to Cart
Quantity On Hand: 38
This is small but powerful 5V stepper motor, comes with ULN2003 driver and it's very easy to use in Arduino project.
ID: 10167   Your Price: €5.00
Small Image
Add to Cart
Quantity On Hand: 4
Brand: Osmtec
This is bipolar NEMA 14 stepper motor with step angle 1.8°, holding torque 23 Ncm, 5 mm axis and motor size 35x35x42 mm. Each phase draws 0.5A at 7.5V, it has 4 wires (length 30 cm) with no connector.
ID: 12438   Your Price: €14.90
Small Image
Add to Cart
Quantity On Hand: 1
Brand: E3D
This motor is lighter and shorter than a typical NEMA17 motor, however it produces almost as much torque. It is suitable for driving geared or direct extruders and is used on E3D's Titan extruder.
ID: 10995   Your Price: €23.23
Small Image
Add to Cart
Quantity On Hand: 7
Brand: Osmtec
This is the shortest bipolar Nema 17 stepper motor we have, it with step angle 1.8° and size 42x42x20mm. It has 4 wires (40 cm long, without connector), each phase draws current 1.0A, with holding torque 16Ncm (22.66oz.in). Works great with various 3D printer extruders.
ID: 12442   Your Price: €12.35
Small Image
Add to Cart
Quantity On Hand: 15
Bipolar stepper motor, 1.8°step angle, 28 Ncm holding torque, 1.3A rated current, dimensions 42x42x34 mm, 22 mm shaft (5 mm diameter), comes with 1m lead wires with 4-pin Dupont connector.
ID: 11931   Your Price: €11.15
Small Image
Add to Cart
Quantity On Hand: 18
Brand: Osmtec
This is high torque Nema 17 stepper motor with 1.8° step angle (200 steps/revolution). Each phase draws 2A, allowing for a holding torque of 59Ncm(83.6oz.in). It's good ideal for 3D printers, as well as CNC and robotics applications. The motors are supplied with a 1 metre long power cable with a 4-pin Dupont female connector already fitted.
ID: 11130   Your Price: €17.60
Small Image
Add to Cart
Quantity On Hand: 1
Brand: Osmtec
This is popular geared Nema 17 stepper motor with a medium body and torque. It has an integrated planetary gearbox with a 5.18:1 gear ratio, the resolution reach 0.35° step angle. It's a good solution in applications that need very low rotation speeds and/or lots of torque.
ID: 11045   Your Price: €61.50
Small Image
Add to Cart
Quantity On Hand: 5
Brand: Osmtec
This bipolar NEMA 23 stepper motor with step angle 1.8deg and size 57x57x114mm. It has 4 lead wires 400 mm in length, each phase draws 3.5A, with holding torque 3.0Nm(425oz.in). Shaft length 24 mm, shaft diameter 10 mm, motor weight 1.6 kg.
ID: 12570   Your Price: €62.20
Small Image
Add to Cart
Quantity On Hand: 61
Brand: RobotDigg
300 mm long stepper motor cable with 4-pin 2.54 mm Dupont connector, and motor connector which fits RobotDigg and Wantai stepper motors.
ID: 11137   Your Price: €1.30
Small Image
Add to Cart
Quantity On Hand: 50
Brand: RobotDigg
800 mm long stepper motor cable with 4-pin 2.54 mm Dupont connector, and motor connector which fits RobotDigg and Wantai stepper motors.
ID: 11138   Your Price: €1.86
Small Image
Add to Cart
Quantity On Hand: 40
Brand: RobotDigg
1200 mm long stepper motor cable with 4-pin 2.54 mm Dupont connector, and motor connector which fits RobotDigg and Wantai stepper motors.
ID: 11139   Your Price: €2.45
Small Image
Add to Cart
Quantity On Hand: 7
Brand: RobotDigg
700 mm long stepper motor cable with 4-pin 2.54 mm Dupont Lock connector, and motor connector which fits RobotDigg and Wantai stepper motors.
ID: 11189   Your Price: €2.79
Small Image
Add to Cart
Quantity On Hand: 40
Stepper motor cable with standard connector on motor end and 4-pin JST XH 2.54 mm connector on the other end of cable.
ID: 11897   Your Price: €1.59
Small Image
Add to Cart
Quantity On Hand: 30
Stepper motor cable with standard connector on motor end and 4-pin JST XH 2.54 mm connector on the other end of cable.
ID: 11898   Your Price: €1.86
Small Image
Add to Cart
Quantity On Hand: 25
Stepper motor cable with standard connector on motor end and 4-pin JST XH 2.54 mm connector on the other end of cable.
ID: 11899   Your Price: €1.99
Small Image
Add to Cart
Quantity On Hand: 13
Stepper motor cable with standard connector on motor end and 4-pin JST XH 2.54 mm connector on the other end of cable.
ID: 11900   Your Price: €2.39
Small Image
Add to Cart
Quantity On Hand: 49
Stepper motor cable with standard connector on motor end and 4-pin JST XH 2.54 mm connector on the other end of cable.
ID: 11901   Your Price: €2.80
Small Image
Add to Cart
Quantity On Hand: 14
This switchboard enables connecting two stepper motors (e.g. NEMA17) to a single motor driver and it's usually used for 3D printer z-axis motors. Comes with 10 cm connector cable with JST XH connectors on both ends.
ID: 11919   Your Price: €2.50
Small Image
Add to Cart
Quantity On Hand: 13
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
ID: 11742   Your Price: €5.18
Small Image
Add to Cart
Quantity On Hand: 48
Brand: Keyes
A4988 is a complete microstepping motor driver with built-in translator for easy operation. The product is available in full, half , 1/4, 1 / 8 and 1 /16 step mode to operate bipolar stepper motors of an output drive capability of up to 35 V and ± 2 A.
ID: 10547   Your Price: €3.20
Small Image
Add to Cart
Quantity On Hand: 23
DRV8825 can drive high torque motor, compared to A4988 it can stand for up to 45 VDC power supply, output 2.5 A per phase and supports full, half, 1/4th, 1/8th, 1/16th and 1/32th microstepping.
ID: 10812   Your Price: €4.25
Small Image
Add to Cart
Quantity On Hand: 12
Brand: Makerbase
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 5.5V-36V, 3-5V logic, 256 subdivision. This is revision 2.0.
ID: 11894   Your Price: €9.50
Small Image
Add to Cart
Quantity On Hand: 5
Brand: Makerbase
Ultra silent stepper motor driver, supports up to 256 microsteps, sensorless homing, max 2.5A current, 6-28V power supply, 3.3/5V logic, dir/step or UART mode. Large heatsink is included in the package.
ID: 12585   Your Price: €10.00
Small Image
Add to Cart
Quantity On Hand: 8
Brand: Bigtreetech
Enhanced version of 2209 driver, with up to 256 microsteps, max. 2.8A current, 5-29V power supply, supports step/dir or UART mode, MicroPlyer, StealthChop2, SpreadCycle and StallGuard 4. It's compatible with the CoolStep standars, it saves up to 75% power.
ID: 12573   Your Price: €10.50
Small Image
Add to Cart
Quantity On Hand: 10
Brand: Makerbase
Big current stepper motor driver based on TMC2160 chip, max current 4.33 A, up to 64 microsteps, opto coupled signal, supports 8-40 V DC power supply, spread cycle or stelth chop working mode.
ID: 12584   Your Price: €19.00
Small Image
Add to Cart
Quantity On Hand: 15
The TB6600 Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a digital pulse signal. TB6600 stepper motor driver has a wide range power input 9~42VDC power supply. It is able to output 4A peak current, which is enough for the most of stepper motors.
ID: 11890   Your Price: €15.00
Small Image
Add to Cart
Quantity On Hand: 5
Brand: Osmtec
The DM542T is a fully digital stepper driver with support for PUL/DIR mode, over-voltage and over-current protections, +18~50VDC input voltage, 5V/24V logic voltage selector (default setting 24V), pulse input frequency up to 200KHz, 8 selectable peak current settings (1.0-4.5 A) and 16 selectable microstep resolutions. Suitable for 2-phase and 4-phase motors, e.g. NEMA17, 23 or 24.
ID: 12602   Your Price: €38.00
Small Image
Add to Cart
Quantity On Hand: 22
This board simplifies usage of A4988/DRV8825 stepper motor driver. It can be powered by 12-24 V DC and uses 5 V logic level. Microstepping can be easily adjusted via DIP switches.
ID: 11185   Your Price: €4.40
Small Image
Add to Cart
Quantity On Hand: 22
This stepper driver expansion board can be used for CNC, engraving machines or 3D printers. It has a total of four slots, can drive up to four A4988 stepper motors. Input voltage 12-36 VDC.
ID: 10969   Your Price: €5.50
Small Image
Add to Cart
Quantity On Hand: 2
Brand: Geeetech
RAMPS 1.4 is designed to fit the entire electronics needed for a RepRap 3D printer in one small package at low cost. It interfaces Arduino Mega 2560 boards.
ID: 10444   Your Price: €12.00
Small Image
Add to Cart
Quantity On Hand: 12
Brand: Tower Pro
The original Tower Pro SG90 micro servo is small and lightweight with high output power. The servo can rotate approximately 180 degrees and works just like standard servos. You can use any servo code, hardware or library to control this servo. Comes with 3 horns (arms) and screws.
ID: 11945   Your Price: €9.00
Small Image
Add to Cart
Quantity On Hand: 2
Brand: Tower Pro
The MG90S is one of the most popular metal gear micro servo. The servo can rotate approximately 180 degrees and works just like standard servos. You can use any servo code, hardware or library to control this servo. Comes with 3 horns (arms) and screws.
ID: 10883   Your Price: €11.50
Small Image
Add to Cart
Quantity On Hand: 14
This standard Servo for use in remote controlled models, comes with a range of attachments and can be used as a direct replacement for the Futaba S3003.
ID: 10939   Your Price: €8.00
Small Image
Add to Cart
Quantity On Hand: 3
Brand: Tower Pro
MG996R is a powerful digital servo with metal gears. It rotates approx. 180 degrees, operating voltage is 4.8-7.2 V DC and it comes with mounting screws and horns. Dimensions: 40x19x43 mm, weight: 55g.
ID: 11606   Your Price: €16.90
Small Image
Add to Cart
Quantity On Hand: 11
Brand: Fitec
Get your robot project moving with this FS90R 360 degree continuous rotation micro servo, which can deliver 130 RPM at 6V with no load.
ID: 11309   Your Price: €7.50
Small Image
Add to Cart
Quantity On Hand: 17
This module lets you control up to 16 servo motors or any other kind of PWM outout over single I2C connection. It supports both 3.3V and 5V logic, has 12-bit resolution for each output and adjustable PWM frequency up to 1.6 KHz.
ID: 12271   Your Price: €13.00
Small Image
Add to Cart
Quantity On Hand: 2
Brand: Kitronik
Take your robotics project to the next level and control 16 servos with the Kitronik I2C Servo Driver Board for the BBC micro:bit.
ID: 11305   Your Price: €17.12
Small Image
Add to Cart
Quantity On Hand: 17
Mount servos further away from the power source with this 30cm male to female servo extension cable which is ideal for use with most of the mini servos.
ID: 10953   Your Price: €3.32
Small Image
Add to Cart
Quantity On Hand: 11
Mount servos further away from the power source with this 60cm male to female servo extension cable which is ideal for use with most of the mini servos.
ID: 10954   Your Price: €4.38
Small Image
Add to Cart
Quantity On Hand: 44
3-6 V DC motor, 1:48 gear ratio, double shaft, no load speed 90 rpm (3V), dimensions 71x37x22 mm.
ID: 12264   Your Price: €2.85
Small Image
Add to Cart
Quantity On Hand: 15
A 68mm diameter wheel for use with a matching geared hobby motor. They have a solid plastic wheel rim and rubber tire. Perfect for building your own buggy. Diameter 68 mm, width 27 mm, for 3.66 mm shaft.
ID: 11301   Your Price: €2.00
Small Image
Add to Cart
Quantity On Hand: 10
This sensor allows you to calculate rotational speed of motor or count pulses between sensors (there is a 5 mm wide gap). In case of obstacle the digital output is HIGH, with no obstacle it's LOW. LM393 voltage comparator outputs signal to analog output pin. Working voltage is 3.3-5 V, board dimensions 32x14 mm.
ID: 12347   Your Price: €1.20
Small Image
Add to Cart
Quantity On Hand: 108
Plastic disc for optical speed encoder and TT DC motor with 3.5x5.4 mm axis, 20 slots, 26 mm diameter, 3.6 mm thickness.
ID: 12348   Your Price: €0.20
Small Image
Add to Cart
Quantity On Hand: 19
12V DC motor, 130 RPM, 0.3 A rated load, 3.6 W power, 1.3 A stall current. Dimensions: ∅25x51 mm body, ∅4x10 mm shaft.
ID: 12661   Your Price: €7.90
Small Image
Add to Cart
Quantity On Hand: 19
Bracket for JGA25 series DC motors, comes with two screws.
ID: 12662   Your Price: €1.70
Small Image
Add to Cart
Quantity On Hand: 17
PWM DC motor speed controler, 10-30 VDC input, 3A output current (max. 4A), 5-95% speed regulation range, 500 Hz PWM frequency, dimensions 74x47x28 mm (board only). Comes with 3-way switch (forward, off, backward) and potentiometer with a cap.
ID: 12660   Your Price: €12.50
Small Image
Add to Cart
Quantity On Hand: 5
Brand: Adafruit
This motor driver has a lot of great specs that make it useful for a wide variety of mechatronics. In particular, the simple resistor-set current limiting and auto-magic PWM support make it super easy to use with just about any brushed DC motor.
ID: 11645   Your Price: €12.50
Small Image
Add to Cart
Quantity On Hand: 36
The L9110 2-channel h-bridge motor driver board is rated for a 2.5V to 12V DC supply and can drive either two DC motors or one 4 wire 2 phase stepper motor. It provides 800mA of continuous output current. Board size 28x21 mm.
ID: 11798   Your Price: €1.90
Small Image
Add to Cart
Quantity On Hand: 10
The L9110S 4-channel h-bridge motor driver board is rated for a 2.5V to 12V DC supply and can drive either four DC motors or two 4 wire 2 phase stepper motor. It provides 800mA of continuous output current. Board size 50x36.5 mm.
ID: 12350   Your Price: €3.50
Small Image
Add to Cart
Quantity On Hand: 16
This is Arduino UNO/MEGA shield which can drive up to four DC motors or two stepper motors (unipolar or bipolar). As if this is not enough, it can control two servos at the same time.
ID: 10973   Your Price: €5.90
Small Image
Add to Cart
Quantity On Hand: 26
This module is based on L298N Dual H-Bridge Motor Driver IC, it can control two DC motors or one stepper motor, and it's largely used in robot cars. Input voltage 5-35V (with 5V output), 5V logic level, 2A max output single bridge.
ID: 11644   Your Price: €4.80
Small Image
Add to Cart
Quantity On Hand: 85
R385 diaphragm water pump, ideal for plant watering projects, 6-12 VDC (recommended 9V/1A), flow 1.5-2 l/min, outlet diameter 6mm (inner) / 9mm (outer).
ID: 11521   Your Price: €7.75
Small Image
Add to Cart
Quantity On Hand: 45
PVC pipe for small pumps, inner diameter 6 mm, outer diameter 8 mm, sold by meter.
ID: 12387   Your Price: €1.30
Small Image
Add to Cart
Quantity On Hand: 23
This board allows you to turn on and off, and control the speed of motors or micro pumps or the brightnes of LED lighting. Input (3.3-20 VDC) and output (3.7-27 VDC, up to 10 A) are completely isolated, PWM frequency: 0-20KHz, board size: 22.7x36.8 mm.
ID: 12394   Your Price: €4.90
Small Image
Add to Cart
Quantity On Hand: 4
Simply provide power from a battery or microcontroller pin (red is positive, blue is negative) and it will buzz away. Works from 2V up to 5V, higher voltages result in more current draw but also a stronger vibration.
ID: 10692   Your Price: €2.50