• Search Catalog

Cart Summary

Shopping Cart Empty

Main > Sensor modules > Miscellaneous sensors

Miscellaneous sensors

Miscellaneous sensors and extras
Small Image
Add to Cart
Quantity On Hand: 23
Brand: SainSmart
SainSmart 37 in 1 Sensor Module Kit for Raspberry Pi & Arduino MCU.
ID: 10581   Your Price: €27.50
Small Image
Add to Cart
Quantity On Hand: 42
ADS1115 is precision analog-to-digital 16-bit converter (ADC). The chip can be configured as 4 single-ended input channels, or two differential channels. It communicates over I2C, and has built-in programmable gain amplifier (up to x16). This general purpose ADC can run from 2V to 5V power/logic, can measure a large range of signals and its very easy to use.
ID: 11262   Your Price: €7.50
Small Image
Add to Cart
Quantity On Hand: 61
Simple breakout board with photoresistor, analog and digital output, sensitivity can be adjusted, power and logic level 3.3-5 V, size 32x15 mm.
ID: 12386   Your Price: €1.30
Small Image
Add to Cart
Quantity On Hand: 2
Brand: Adafruit
The LTR390 is one of the few low-cost UV sensors available with both ambient light and UVA sensing with a peak spectral response between 300 and 350nm. Works with both 3.3 and 5 V logic, comes with EasyC/Qwiic/Stemma QT conectors for easy I2C connecting.
ID: 12366   Your Price: €9.50
Small Image
Add to Cart
Quantity On Hand: 4
Brand: Adafruit
The Adafruit TPL5110 Power Timer is a stand-alone breakout that will turn any electronics into low-power electronics! It will take care of turning your project on/off using a built in timer that can vary from once every 100ms up to once every two hours.
ID: 11085   Your Price: €7.30
Small Image
Add to Cart
Quantity On Hand: 63
DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. Provides two configurable alarm clock and calendar, monitors the status of VCC to detect power failures, provide a reset output, and if necessary, automatically switch to the backup power supply.
ID: 10977   Your Price: €5.00
Small Image
Add to Cart
Quantity On Hand: 5
Brand: Soldered (e-radionica)
RTC (Real Time Clock) is a device that carefully and precisely tracks time and dates. This breakout can work with extremely low current and thanks to the alarm option and interrupt pin, it will allow a microcontroller to enter sleep mode until its awaken by this RTC.
ID: 12256   Your Price: €6.50
Small Image
Add to Cart
Quantity On Hand: 70
In the presence of magnetic field, signal pin goes high, led flashes. Working Voltage: 4.5V-24V.
ID: 10126   Your Price: €1.00
Small Image
Add to Cart
Quantity On Hand: 14
The module is based on ACS712ELC-30A chip and can measure the positive and negative 30 A (AC or DC current) using Hall effect. Corresponding analog output is 66 mV/A. Operating voltage: 5 V, size 31 x 13 mm.
ID: 11098   Your Price: €5.00
Small Image
Add to Cart
Quantity On Hand: 13
The module is based on ACS712ELC-05B chip and can measure the positive and negative 5 A (AC or DC current) using Hall effect. Corresponding analog output is 185 mV/A. Operating voltage: 5 V, size 31 x 13 mm.
ID: 12452   Your Price: €5.00
Small Image
Add to Cart
Quantity On Hand: 13
Brand: Sea
Measure liquid/water flow for your solar, computer cooling, or gardening project using this handy basic flow meter.
ID: 10410   Your Price: €6.50
Small Image
Add to Cart
Quantity On Hand: 31
This is a Micro SD card reader module with SPI interface for Arduino. It supports Micro SD cards (<=2GB) and Micro SDHC cards (<=32GB), works with both 3.3 and 5 V logic level, but needs 4.5 ~ 5.5 V on power input pin (Vin).
ID: 11246   Your Price: €3.00
Small Image
Add to Cart
Quantity On Hand: 26
Brand: (Intenso)
Class 10 (SDHC & SDXC) MicroSD card with SD adapter, very usefull for Arduino SD card modules, older 3D printer models or any device that can't handle SD cards with more than 4 GB capacity.
ID: 12469   Your Price: €5.00
Small Image
Add to Cart
Quantity On Hand: 4
Brand: Adafruit
Some microcontrollers, like the ATmega328, have built in EEPROM, but some, especially ARM Cortex's, don't. That's where this petite Adafruit 24LC32 I2C EEPROM Breakout comes in to help! With 32 Kbit (4 KByte) of storage, and handy chainable Stemma QT connectors, it's just the right amount of simple I2C-controllable storage. Since its external to your microcontroller, uploading new flash memory won't wipe the data from this chip.
ID: 11951   Your Price: €5.84
Small Image
Add to Cart
No items available to ship
An anemometer is a device used for measuring wind speed, and is a common weather station instrument. This well made anemometer is designed to sit outside and measure wind speed with ease.
ID: 10394   Your Price: €69.00
Small Image
Add to Cart
No items available to ship
Brand: Seeed Studio
Water level sensor for Arduino can be used to measure the water level up to 10cm deep, with 5mm accuracy. It's corrosion resistant, communicates over I2C, has Grove connector. It comes with 20cm Grove cable, we added 30cm Grove to 4 pin female Dupont for easier use with standard Arduino boards.
ID: 11840   Your Price: €11.68
Small Image
Add to Cart
No items available to ship
Non-contact liquid level sensor, working voltage 5V, outputs HIGH on detection, range 0-10 mm (non-metallic containers only), response time 500 ms, 34x24x6 mm with 30 cm cable and connector (brown = VCC, blue = GND, black = OUT).
ID: 12510   Your Price: €7.00
Small Image
Add to Cart
Quantity On Hand: 4
This optical fingerprint sensor can be used to scan fingerprint and it can send the processed data to a microcontroller via serial communication. All registered fingerprints are stored in this module (up to 127 fingerprints).
ID: 12509   Your Price: €19.00
Small Image
Add to Cart
Quantity On Hand: 18
A small module with a heart rate and oxygen saturation level sensor, based on the MAX30102 chip. It communicates via the I2C interface (there is also one interrupt pin), power supply and logic 3.3-5 V, low power consumption due to programmable sample rate and LED current. Dimensions: 14x14 mm. IMPORTANT NOTICE: This is educational sensor only, do not use it for medical or diagnostic purposes!
ID: 12270   Your Price: €5.00
Small Image
Add to Cart
Quantity On Hand: 9
Brand: Covidien
The H124SG Covidien electrode type has a pre-gelled adhesive side with non-irritating gel, especially developed to prevent allergic reactions. The foam electrode is latex free and therefore suitable for every skin type.
ID: 11776   Your Price: €7.83
Small Image
Add to Cart
Quantity On Hand: 3
Brand: DFRobot
The Geiger counter can only detect ionizing radiation, such as nuclear radiation, X-rays, cosmic rays, etc. This product is not a professional measuring instrument and is only suitable for principle research and teaching demonstration. Not for use in radiation dose measurement that directly affects personal safety.
ID: 12094   Your Price: €97.00