• Search Catalog

Cart Summary

Shopping Cart Empty

Main >  > USB-UART (serijski) CH340 pretvarač

USB-UART (serijski) CH340 pretvarač

This small adapter converts USB communication into UART (serial) communication, and everything you might need is already on this small board. In addition to the classic UART pins that are arranged in the standard layout: DTR, RXD, TXD, VCC, CTS, GND, other pins available of the CH340 chip are also available on header: RS232, RI, DCD, DSR, RST and CTS.

Product Id: 12257
Your Price: €5.50
Shipping Weight: 15 g
Add to Cart
Quantity On Hand:8
Indication LEDs show activity on RXT and TXD lines, and a 500mA fuse protects this programmer, the USB port of the computer that is connected, and other devices connected to it from damage. Additionally, there is a voltage regulator and a switch on the board, and it is possible to choose the output voltage of 3.3V or 5V, depending on the device you are using. The logic of the UART signal is always 3.3V, but don't worry, 5V devices will work with 3V3 UART logic without any problems. Use a USB-C cable to connect.

• USB - UART bridge: CH340
• Input voltage: 5V (USB)
• Output voltage: 3.3V ili 5V, selected using the switch
• UART signal logic level: 3.3V
• USB connector: USB-C
• Power LED and RXD/TXD indication LEDs
• Dimensions: 38 x 22 mm
-------


You might be interested in these as well:

Small Image
Add to Cart
Quantity On Hand: 27
This module is based on CP2102 chip, there is a standard USB Micro connector on one side, and 6-pin TTL header on the other side of board. It allows you to easily connect your MCU to PC, communicate with it and upload programms.
ID: 12272   Your Price: €6.50
Small Image
Add to Cart
Quantity On Hand: 7
Brand: Adafruit
This is a high-quality CP2102N USB-Serial chip that can upload code at a blistering 3 Mbit/s, it has has auto-reset for Arduino/ATmega328 boards and the same RS-485 and GPIO support that the CP2104 has, making it 'drop in' replacement for discontinued CP2104 Friend.
ID: 12449   Your Price: €8.50
Small Image
Add to Cart
Quantity On Hand: 4
Brand: Adafruit
This board features the CH9102F USB-Serial chip that can upload code at 3Mbit/s for fast development time. It also has auto-reset for Arduino/ATmega328 boards, fairly good driver support, and for 99% of use cases is a fine replacement of the FTR232, FT231x or CP210x series.
ID: 12676   Your Price: €8.00
Small Image
Add to Cart
Quantity On Hand: 3
Brand: Adafruit
This is a USB to TTL serial cable, with a FTDI FT232RL usb/serial chip embedded in the head. It has a 6-pin socket at the end with 5V power and ground, as well as RX, TX, RTS and CTS at 3V logic levels, and it's 914 mm long. Because the cable is 5V-logic compliant, you can use it with 3v or 5v logic just fine - no level shifting required.
ID: 11087   Your Price: €31.00
Small Image
Add to Cart
Quantity On Hand: 12
USB 3 data/charging cable, Type A to Type C connector, max. 5V/3A, length 30 cm.
ID: 11892   Your Price: €3.85