• Search Catalog

Cart Summary

Shopping Cart Empty

Main > Wireless & IoT

Wireless communication components and modules

Small Image
Add to Cart
Quantity On Hand: 8
Brand: Raspberry Pi
The Raspberry Pi Pico W is based on the Raspberry Pi RP2040 chip, but with wireless connectivity added. Alongside RP2040, a Raspberry Pi-designed chip, which features two ARM Cortex-M0+ cores clocked at 133MHz with 256KB RAM, 26 GPIO pins, and a broad range of interfacing options, there is also Infineon CYW43439 wireless chip which supports IEEE 802.11 b/g/n wireless LAN (and BT 5.2 which is currently not supported).
ID: 12201   Your Price: €11.00
Small Image
Add to Cart
Quantity On Hand: 7
Brand: Raspberry Pi
The Raspberry Pi Pico WH is based on the Raspberry Pi RP2040 chip, but with wireless connectivity added, soldered headers and JTAG connector. Alongside RP2040, a Raspberry Pi-designed chip, which features two ARM Cortex-M0+ cores clocked at 133MHz with 256KB RAM, 26 GPIO pins, and a broad range of interfacing options, there is also Infineon CYW43439 wireless chip which supports IEEE 802.11 b/g/n wireless LAN and BT 5.2.
ID: 12457   Your Price: €12.00
Small Image
Add to Cart
Quantity On Hand: 18
ESP8266 offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. Perfect and simple AT commands.
ID: 10695   Your Price: €4.00
Small Image
Add to Cart
Quantity On Hand: 15
This module allows for serial communication between computer and ESP-01:ESP8266 WiFi module by using AT commands. It's not intended to programm the ESP module, but you can add that funcionality by soldering a push button (link in description).
ID: 12516   Your Price: €2.50
Small Image
Add to Cart
Quantity On Hand: 9
USB to ESP-01 adapter module has CH340G USB to TTL driver IC onboard which allows for serial communication with ESP8266 chip. Use switch to chosse between communication (UART) and programming (PROG) mode.
ID: 12595   Your Price: €5.00
Small Image
Add to Cart
Quantity On Hand: 12
Brand: WeMos
This is a ESP8266 based microcontroller board - it's WiFi connectivity and small dimensions make it a perfect choice for any IoT project. It's Arduino and NodeMCU compatible, it has 11 digital input/output pins, one analog input (3.2 V max) and a micro USB connector. Package includes 2 male headers, 2 long and 2 short feamle headers - just solder the ones that suit you the most.
ID: 10923   Your Price: €7.00
Small Image
Add to Cart
Quantity On Hand: 3
Brand: Arduino
The Arduino Nano ESP32 is the first ever Arduino board based on a ESP32 microcontroller from Espressif, the NORA-W106 module from u-blox®. This module supports both Wi-Fi® and Bluetooth® (5.0 and above), making it an ideal device for IoT development. With USB-C® connector, 16 MB (128 Mbit) of Flash, support for MicroPython & Arduino IoT Cloud enabled, it is a very versatile development board in a standard Nano form factor.
ID: 12450   Your Price: €35.00
Small Image
Add to Cart
Quantity On Hand: 4
Brand: Adafruit
This is the smallest board based on ESP32-S2, a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has built-in native USB so it can act like a keyboard/mouse, MIDI device, disk drive, etc! It comes with 4 MB flash and 2 MB PSRAM, but only has a single-core 240 MHz chip and no Bluetooth support. Works with Arduino or CircuitPython and has easyC/Qwiic/Stemma QT I2C connector.
ID: 12121   Your Price: €19.90
Small Image
Add to Cart
Quantity On Hand: 6
Brand: Adafruit
The ESP32-S3 has arrived in QT Py format - with dual 240 MHz cores, 4 MB Flash, 2 MB PSRAM, WiFi/BLE support and native USB, this QT Py is great for powering your IoT projects. It has NeoPixel LED and Stemma QT/Qwiic/EasyC for easy I2C sensor connection. Program it using CircuitPython or Arduino IDE.
ID: 12501   Your Price: €19.60
Small Image
Add to Cart
Quantity On Hand: 9
One of the smallest ESP32 development boards available, it's pinout is compatible with ESP8266 based D1 Mini board, so D1 shields can be used with this board too. Comes with female pin header set (not soldered), including the one pair with extra long pins for shields.
ID: 11918   Your Price: €13.00
Small Image
Add to Cart
Quantity On Hand: 11
This board is based on ESP32-C3-MINI, a 32-bit RISC-V single-core microprocessor with 4 MB integrated Flash, 802.11 b/g/n WiFi and Bluetooth 5 LE support, 15 GPIO pins and onboard RGB LED.
ID: 12515   Your Price: €7.50
Small Image
Add to Cart
Quantity On Hand: 2
Brand: Adafruit
The HUZZAH32 is ESP32-based Feather, made with the official WROOM32 module and with built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer charger, and just about all of the GPIOs brought out so you can use it with any of Adafruit's Feather Wings. The ESP32 has both WiFi and Bluetooth Classic/LE support. That means it's perfect for just about any wireless or Internet-connected project.
ID: 11201   Your Price: €29.80
Small Image
Add to Cart
Quantity On Hand: 1
Brand: Adafruit
The ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has built-in native USB so it can act like a keyboard/mouse, MIDI device, disk drive, etc! It comes with 4 MB flash and 2 MB PSRAM, but only has a single-core 240 MHz chip and no Bluetooth support. Works with Arduino or CircuitPython, has easyC/Qwiic/Stemma QT I2C connector and LiPo battery connector and charger.
ID: 12015   Your Price: €25.08
Small Image
Add to Cart
Quantity On Hand: 2
Brand: Soldered (e-radionica)
Dasduino CONNECTPLUS comes with integrated Wi-Fi and Bluetooth 4.2, which enable low-energy secure connections with data packet length extensions. It uses the powerful ESP32 controller with 4 MB integrated flash and 8 MB integrated PSRAM.
ID: 12259   Your Price: €15.79
Small Image
Add to Cart
Quantity On Hand: 21
Based on ESP-WROOM-32 module, this 30-pin board is a powerful dual core microcontroller with 802.11 b/g/n/e/i WiFi, Bluetooth 4.2 and BLE connectivity. 25 GPIO pins cover all the interfaces you may ever need: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S. Headers are included, but not soldered.
ID: 11638   Your Price: €14.00
Small Image
Add to Cart
Quantity On Hand: 20
Based on ESP-WROOM-32 module, this 30-pin board is a powerful dual core microcontroller with 802.11 b/g/n/e/i WiFi, Bluetooth 4.2 and BLE connectivity. 25 GPIO pins cover all the interfaces you may ever need: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S. This version comes with soldered headers, USB-C type connector and CH340 programmer (you might need to download the driver).
ID: 12265   Your Price: €13.00
Small Image
Add to Cart
Quantity On Hand: 34
Expansion and power shield for 30-pin ESP32 boards, USB-C and Micro 5V inputs and 6.5-16 V DC jack input, SGV (Signal-Ground-Voltage) 3-pin output for all GPIO pins with jumper selectable voltage (3.3 or 5 V power) and I2C extended interface (2 groups). Dimensions 68.6x53.4 mm.
ID: 12280   Your Price: €3.50
Small Image
Add to Cart
Quantity On Hand: 3
Based on ESP32-WROOM-32U module, this board lets you connect external WiFi antenna via uFL/IPEX connector. In any other way, this is a classic ESP32 dev board based on dual-core Xtensa® 32-bit LX6 MCU with 4 MB SPI Flash, 802.11 b/g/n WiFi, Bluetooth 4.2 and BLE. It comes with soldered headers and micro USB connector, antenna is not included.
ID: 12514   Your Price: €12.00
Small Image
Add to Cart
Quantity On Hand: 7
Brand: LilyGo
Development board based on ESP32 with addition of SIM800L module and LiPo battery connector, in combination with low sleep current makes it perfect for outdoor use. Comes with non-soldered headers and flex GSM antenna.
ID: 11746   Your Price: €44.00
Small Image
Add to Cart
Quantity On Hand: 1
Brand: e-radionica
The Maker LED display makes using LED matrix displays simple. The ready to use, fully assembled circuit board has everything you need to run a display - just plug it in! Using and customizing the display is easy, with a specially written Arduino library and a dozen pre-made examples. Maker LED display also has Wi-Fi so it can connect to the internet to retrieve and display information.
ID: 11567   Your Price: €25.37 (€31.72)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 1
Brand: e-radionica
The Maker LED display makes using LED matrix displays simple. The ready to use, fully assembled circuit board has everything you need to run a display - just plug it in! Using and customizing the display is easy, with a specially written Arduino library and a dozen pre-made examples. Maker LED display also has Wi-Fi so it can connect to the internet to retrieve and display information.
ID: 11568   Your Price: €25.37 (€31.72)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 1
Brand: e-radionica
The Maker LED display makes using LED matrix displays simple. The ready to use, fully assembled circuit board has everything you need to run a display - just plug it in! Using and customizing the display is easy, with a specially written Arduino library and a dozen pre-made examples. Maker LED display also has Wi-Fi so it can connect to the internet to retrieve and display information.
ID: 11569   Your Price: €25.37 (€31.72)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 3
This ESP32 based development board has become known in the maker community as the “Cheap Yellow Display” or CYD for short. It's main chip is an ESP32-WROOM-32 module, it comes with a 2.8-inch TFT resistive touchscreen LCD (240x320px), a microSD card interface, an RGB LED, and I/O connectors.
ID: 12571   Your Price: €20.00
Small Image
Add to Cart
Quantity On Hand: 5
Brand: Geekcreit
This product combines 802.11b/g/n WiFi + BT/BLE SoC module, low power dual-core 32-bit CPU with 9 IO ports, microSD card reader and OV2640 camera module in just 27x40.5x11.5 mm.
ID: 11570   Your Price: €19.00
Small Image
Add to Cart
Quantity On Hand: 6
Brand: Seeed Studio
Seeed Studio XIAO ESP32S3 Sense integrates a camera sensor, digital microphone, and SD card support. Combining embedded ML computing power and photography capability, this development board can be your great tool to get started with intelligent voice and vision AI.
ID: 12517   Your Price: €23.00
Small Image
Add to Cart
Quantity On Hand: 3
Brand: Adafruit
Give your ItsyBitsy project a lift with the Adafruit AirLift Bitsy Add-On - a daughterboard that lets you use the powerful ESP32 as a WiFi co-processor. This chip can handle all the heavy lifting of connecting to a WiFi network and transferring data from a site, even if its using the latest TLS/SSL encryption (it has root certificates pre-burned in).
ID: 11702   Your Price: €22.30
Small Image
Add to Cart
Quantity On Hand: 2
Brand: Adafruit
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will bridge the two. This model has SMA connector (often used for cellular and GPS connections), cable length is 150 mm.
ID: 10708   Your Price: €5.18
Small Image
Add to Cart
Quantity On Hand: 8
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will bridge the two. This model has SMA connector (often used for cellular and GPS connections) and 10 cm of cable.
ID: 12300   Your Price: €2.25
Small Image
Add to Cart
Quantity On Hand: 13
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will bridge the two. This model has SMA connector (often used for cellular and GPS connections) and 20 cm of cable.
ID: 12301   Your Price: €2.50
Small Image
Add to Cart
Quantity On Hand: 6
Brand: Adafruit
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will bridge the two. This model has RP-SMA connector (often used for WiFi antennas), cable length is 150 mm.
ID: 11073   Your Price: €5.18
Small Image
Add to Cart
Quantity On Hand: 23
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will bridge the two. This model has RP-SMA connector (often used for WiFi antennas) and 10 cm of cable.
ID: 12302   Your Price: €2.25
Small Image
Add to Cart
Quantity On Hand: 20
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will bridge the two. This model has RP-SMA connector (often used for WiFi antennas) and 20 cm of cable.
ID: 12303   Your Price: €2.50
Small Image
Add to Cart
Quantity On Hand: 3
Brand: Arduino
The Arduino Nano 33 BLE is an evolution of the traditional Arduino Nano, but featuring a lot more powerful processor, the nRF52840 from Nordic Semiconductors, a 32-bit ARM® Cortex™-M4 CPU running at 64 MHz. The main processor includes other amazing features like Bluetooth® pairing via NFC and ultra low power consumption modes.
ID: 11846   Your Price: €37.90
Small Image
Add to Cart
Quantity On Hand: 25
HC-05 Bluetooth module with serial communication, can be set as slave or master, 3.3 V logic, 3.6-6 V power input.
ID: 11611   Your Price: €9.00
Small Image
Add to Cart
Quantity On Hand: 20
BLE Bluetooth 4.0 module with serial communication, master/slave configuration, 3.3 V operating voltage, dimensions 34x16 mm.
ID: 12035   Your Price: €12.00
Small Image
Add to Cart
Quantity On Hand: 18
Board is based on Bluetooth 5.0 module (4.0 and 4.2 compatibile), working frequency 2.4 GHz, GFSK modulation mode, max output 4 dB, max transmission distance up to 60 m. It can be controlled via AT commands over UART and by default BLE can be used without configuration. Power supply 3.6-6V, dimensions 32.6x18.9 mm.
ID: 12641   Your Price: €4.20
Small Image
Add to Cart
Quantity On Hand: 20
nRF24L01 is a 2.4GHz worldwide ISM band single-chip wireless transceiver with SPI interface, built-in antenna and low power consumption.
ID: 11902   Your Price: €3.19
Small Image
Add to Cart
Quantity On Hand: 9
Based on 2.4 GHz NRF24L01+ chip and equipped with PA/LNA chip for long range communication (up to 1100 m with no obstacles), 2.4 GHz antenna included.
ID: 11043   Your Price: €7.70
Small Image
Add to Cart
Quantity On Hand: 30
This board makes it easier to include the nRF24L01 module to your project. Power supply (VCC) 5-12V.
ID: 12597   Your Price: €1.00
Small Image
Add to Cart
Quantity On Hand: 10
Operating frequency 433/868/915MHz, number of channels 170, modulation mode FSK/GMSK, max output power +10dBm, sensitivity -100dBm, max operating rate 76.8Kbit/s, operating voltage 2.7-3.3V, efective range 1000m in open space, antenna included.
ID: 10852   Your Price: €8.80
Small Image
Add to Cart
Quantity On Hand: 19
The 433MHz RF link kit is consisted of transmitter and receiver, popularly used for remote control.
ID: 10661   Your Price: €2.50
Small Image
Add to Cart
Quantity On Hand: 63
Brand: Shengda
This 21 cm 868 MHz antenna is ideal for LoRa modules. It has moveable joint, 5 dBi gain and SMA-male connector.
ID: 10959   Your Price: €5.18
Small Image
Add to Cart
Quantity On Hand: 11
Mini WiFi 2.4 GHz inner antenna with uFL/IPEX connector and 5 cm cable, 3 dBi gain, 10 cm full length.
ID: 12513   Your Price: €1.50
Small Image
Add to Cart
Quantity On Hand: 19
SIM800L based GPRS module with the smallest footprint, works on 2G networks, accepts Micro SIM card, comes with both PCB and small GSM antennas. Operating voltage 3.7-4.2V (peak current 2A), dimensions 22x18 mm.
ID: 12030   Your Price: €11.80
Small Image
Add to Cart
Quantity On Hand: 24
Short GSM antenna with SMA to IPEX/uFL adapter cable, great for use with SIM800 modules.
ID: 12132   Your Price: €3.00
Small Image
Add to Cart
Quantity On Hand: 7
This board is based on u-Blox Neo-6M GPS module, has on-board backup battery and built-in EEPROM, works both with 3.3V and 5V logic over 9600 baud UART. Comes with small uFL ceramic antenna. Dimensions: 25x45x6 mm.
ID: 12031   Your Price: €9.20
Small Image
Add to Cart
Quantity On Hand: 2
Brand: Adafruit
Wow that's a tiny GPS antenna! This passive antenna is only 9mm x 9mm x 6.5mm in size, with a 50mm long uFL cable. Great for when you want to keep things small.
ID: 10910   Your Price: €8.40
Small Image
Add to Cart
Quantity On Hand: 2
Brand: Adafruit
Wow that's a tiny GPS antenna! This passive antenna is only 15mm x 15mm x 6.8mm in size, with a 50mm long uFL cable. Great for when you want to keep things small.
ID: 10911   Your Price: €5.71
Small Image
Add to Cart
Quantity On Hand: 25
Development kit based on PN532 NFC/RFID V3 module, includes Dupont wires, RFID card and tag for fast prototyping.
ID: 10332   Your Price: €13.00
Small Image
Add to Cart
Quantity On Hand: 7
Brand: Adafruit
This RFID tag is really unique: it works with mobile phones just like other RFID tags, but you can reprogram it over I2C. The tag shows up as an ISO/IEC 15693 (13.56MHz) chip which is readable by phones and tablets. Note that the most popular hobby RFID reader/writer chips like the PN532 do not support ISO15693, but both Apple and Android phones can be used to read the tags with success.
ID: 12017   Your Price: €6.40
Small Image
Add to Cart
Quantity On Hand: 1
Brand: RTL-SDR Blog
Software defined radio dongle by RTL-SDR Blog based on RTL2832U chip, with several improvements over generic brands including use of the R828D tuner, triplexed input filter, notch filter, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA-F connector, aluminium case with passive cooling, bias tee circuit, improved power supply, and built in HF upconverter.
ID: 12279   Your Price: €59.00
Small Image
Add to Cart
Quantity On Hand: 1
Brand: RTL-SDR Blog
Includes 1x RTL-SDR Blog brand R828D RTL2832U 1PPM TCXO SMA-F V4 Dongle, 1x Dipole Antenna Base with 60cm RG174, 2x 23cm to 1m telescopic antenna, 2x 5cm to 13cm telescopic antenna, 1x 3 meter RG174 extension cable, 1x Flexible Tripod Mount, 1x Suction Cup Mount.
ID: 12182   Your Price: €86.00