• Search Catalog

Cart Summary

Shopping Cart Empty

Main > SALE

SALE

The stated prices are valid only for quantities currently available on stock..
Small Image
Add to Cart
Quantity On Hand: 3
Brand: Adafruit
This pressure sensor from Freescale is a great low-cost sensing solution for precision measurement of barometric pressure and altitude. The MPL3115A2 has a typical 1.5 Pascal resolution, which can resolve altitude at 0.3 meters. As a bonus, there's even a fairly good temperature sensor with ±1°C typical accuracy (±3°C max).
ID: 10354   Your Price: €11.89 (€14.86)   Save: 19%
Small Image
Add to Cart
Quantity On Hand: 6
Brand: Kitronik
The MI:power board for the BBC micro:bit brings real portability to your wearable projects. The stylish, lightweight PCB is designed to fit snugly against the BBC micro:bit and features a built in buzzer and 3V coin cell holder.
ID: 11053   Your Price: €5.84 (€7.30)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 3
Brand: E3D
Original E3D v6 extra brass nozzle 0.25 mm in diameter, for 1.75 mm filament, can be mounted on all v6 and v5 all metal and lite hotends.
ID: 11192   Your Price: €12.74 (€15.93)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 1
Brand: E3D
Original E3D v6 brass nozzle 0.15 mm in diameter, for 1.75 mm filament, can be mounted on all v6 and v5 all metal and lite hotends. Used for very high resolution prints, still labeled as 'experimental' by manufacturer.
ID: 11254   Your Price: €18.36 (€22.96)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 2
Brand: Kitronik
This Servo:Lite board for the BBC micro:bit can form the control hub for your robotics project, control up top three servos & it has 5 x RGB ZIP LEDs on board.
ID: 11304   Your Price: €10.08 (€12.61)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 5
Brand: Kitronik
The Klip Halo for the BBC microbit breaks out all of the pins from the microbit to pads spaced around the edge of the Klip Halo. The pads have been carefully designed and spaced so that they are ideal for for use with E-Textiles projects and also for projects that require the use of Crocodile Leads.
ID: 11307   Your Price: €7.64 (€9.56)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 2
Brand: Kitronik
This RTC & Klimate board is a Real Time Clock (RTC) and environmental sensor (BME280) interface for the BBC microbit. The environmental sensor will give the ability to measure temperature, barometric pressure and humidity. The RTC will give the ability to read current time and date.
ID: 11399   Your Price: €16.88 (€21.10)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 2
Brand: Kitronik
This add-on comes with all the parts required to add line following functionality to the :MOVE mini (MK1 or MK2) and does not require any soldering. It can either follow a dark line on a light back ground or a light line on a dark background. Once built, the sensitivity of the left and right sensors can be individually tweaked to ensure smooth operation.
ID: 11432   Your Price: €10.08 (€12.61)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 1
Brand: e-radionica
The Maker LED display makes using LED matrix displays simple. The ready to use, fully assembled circuit board has everything you need to run a display - just plug it in! Using and customizing the display is easy, with a specially written Arduino library and a dozen pre-made examples. Maker LED display also has Wi-Fi so it can connect to the internet to retrieve and display information.
ID: 11567   Your Price: €25.37 (€31.72)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 1
Brand: e-radionica
The Maker LED display makes using LED matrix displays simple. The ready to use, fully assembled circuit board has everything you need to run a display - just plug it in! Using and customizing the display is easy, with a specially written Arduino library and a dozen pre-made examples. Maker LED display also has Wi-Fi so it can connect to the internet to retrieve and display information.
ID: 11568   Your Price: €25.37 (€31.72)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 1
Brand: e-radionica
The Maker LED display makes using LED matrix displays simple. The ready to use, fully assembled circuit board has everything you need to run a display - just plug it in! Using and customizing the display is easy, with a specially written Arduino library and a dozen pre-made examples. Maker LED display also has Wi-Fi so it can connect to the internet to retrieve and display information.
ID: 11569   Your Price: €25.37 (€31.72)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 1
Brand: Raspberry Pi
Raspberry Pi 4 Model B key features are a 64-bit quad-core Cortex-A72 processor, dual-display support at resolutions up to 4K, hardware video decode at up to 4Kp60, 1GB of RAM, dual-band 2.4/5.0GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability (via a separate PoE HAT add-on).
ID: 11600   Your Price: €52.00 (€65.00)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 2
Brand: Fiberlogy
Fiberlogy PP filament creates the possibility of 3D printing with the second most used polymer in the world - Polypropylene. Due to its high resistance to damage and remarkable flexibility as well as resistance to chemical substances (acids, bases, water), it has found many applications in various fields of industry and everyday use.
ID: 11712   Your Price: €30.80 (€38.50)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 1
Brand: Fiberlogy
Fiberlogy PP filament creates the possibility of 3D printing with the second most used polymer in the world - Polypropylene. Due to its high resistance to damage and remarkable flexibility as well as resistance to chemical substances (acids, bases, water), it has found many applications in various fields of industry and everyday use.
ID: 11713   Your Price: €30.80 (€38.50)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 1
Brand: Devil Design
PLA 1.75 mm Glow in the dark blue 1kg.
ID: 11726   Your Price: €30.79 (€38.49)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 1
Brand: Fiberlogy
PCTG is an excellent alternative if you're looking for a filament with PET-G properties, but with increased impact strength. Printing temperature 250-270°C, bed temperature 90-110°C.
ID: 11912   Your Price: €24.95 (€31.19)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 1
Brand: Fiberlogy
PCTG is an excellent alternative if you're looking for a filament with PET-G properties, but with increased impact strength. Printing temperature 250-270°C, bed temperature 90-110°C.
ID: 11967   Your Price: €24.95 (€31.19)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 5
Brand: PrimaCreator
PLA filament in rainbow colors, best used on big models.
ID: 12443   Your Price: €22.00 (€27.50)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 2
The Raspberry Pi 4 Retro Gaming Kit is the best way to create your very own retro gaming console and includes everything you need, including high-quality official Raspberry Pi accessories. RetroPie is already installed on the SD-card, the only thing you have to do is add your favourite games!
ID: 12448   Your Price: €116.00 (€145.00)   Save: 20%
Small Image
Add to Cart
Quantity On Hand: 3
Brand: PrimaCreator
PrimaValue PETG 1.75mm black 1kg.
ID: 12561   Your Price: €19.50 (€21.00)   Save: 7%